φ4.2×15m cement mill
(Central double sliding shoe)
I. Related technical parameter and performance of
cement mill
1. Specification: dia.4.2*15m
2. Production capacity: 160±10t/h(closed-circuit, 42.5 ordinary carbonate cement, equipped with rolling machine and scatter classifier, feed moisture ≤0.5%,feed temperature≤50℃,specific surface area≥350m2/kg)
3. Rotary speed of mill: 15.6r/min
4. Grinding body load: ***t (max)
5. Support method: double sliding shoe
6. Main motor: (*****)
Model: YRKK1000-8 power:4000kW
rotary speed:740r/min
voltage:10KV
7. Main reducer(****):
(1)Model: **160-B
(2)Transferring power: 4000KW
(3)Output rotary speed: 15.6r/min
8. Slow drive device
(1)Model: **S400D
(2)Power of motor: 55kW
(3)Rotary speed of motor: 740r/min
(4)Drive ratio: 198.98:1
9. Diaphragm coupling
Model: **160-C
10. Oil station (equipped with main reducer)
(1)Nominal flow:500L/min
(2)Model of oil pump:XYZ-500
(3)Power of motor:18.5kW
(4)Rotary speed of motor:1460r/min
(5)Cooling area:30m2
(6)Cooling water consumption:45t/h
(7)Power of heater:5×6=30KW
11. Cooling method: water cooling
12.Lubricating type(Thin oil stationXGD-A2×2.5/125)
(1)Low pressure system
Flow:125L/min oil supply pressure:0.4MPa
Oil supply temperature:40±3℃
Motor:Y112M-6 B35 2.2kW
(2)High pressure system
Model of pump:2.5MCY14-1B
Flow:2.5L/min
Oil supply pressure:32MPa
Motor:Y112M-6 2.2kW
(3)Other performance
Cooling water consumption:5.7m3/h
Power of heater:3kW×4
Working media:N220-N320
13. Weight of equipment: ***(excluding drive device and grinding body)
II. Main parts and materials
1. Shell Q235-B δ=45mm
2. Support: Bush body cast steel
Bush lining (Babbitt ZchSnSb11-6)
Roller: 40Cr
Convex and concave spherical body: 40Cr
Spherical base: ZG35SiMn
Soleplate: *235-B
3. Lining: Middle chromium alloy steel
4. Thin oil station: XGD-A2×2.5/125
5. Control cabinet and start-up cabinet
III. Scope of supply
1.Rotary part |
One set |
2.Feed device |
One set |
3.Sliding shoe device |
Two sets/unit |
4.Discharge device |
One set |
5Lining and double diaphragm device |
One set |
6.Main motor ****1000-8 4000KW/10KV |
One unit |
7.Main reducer J*160-B(**) |
One unit |
8.Slow drive device **S400D |
One set |
9.Diaphragm coupling **160-C |
One set |
10.Thin oil station ***-A2×2.5/125 |
Two pieces |
11.Controlcabinet(including high voltage control, low voltage start-up and thin oil station) |
One unit |
12.Coupling |
One unit set |
13.Foundation bolts |
One set |