φ4.4×13m Cement mill
(Central double slide shoe)
一、Technical parameters & performances of cement mill
1、Sepc. :φ4.4×13m
2、Capacity: 120-155t/h(closed circuit,P032.5 or PF32.5 cement,material inlet
grain size≤25mm,material inlet moisture content≤0.5%, material inlet temperature≤60℃, air speed inside of mill≥0.5m/s, configures O-SPEAseparator.)
3、Rotating speed of mill:15.0r/min
4 Grinder load:***t(max)
5、Supporting type: double slide shoe
6、Main motor: (***)
Type:YRKK1000-8 Power:3800kW Rotating speed:740r/min
Voltage:10KV(6KV)
7、Main reducer(*****):
(1) Type:MFY380A
(2) Transmission power:3800KW
(3) Output rotating speed:15.0r/min
8、Slow driving device
(1) Type:MJB710
(2) Motor power:45kW
(3) Motor rotating speed: 740r/min
(4)Transmission ratio:193.9:1
9、Disphram coupling
Type:MFY180L
10、Oil station (configures main reducer)
(1) Nominal flow rate:315L/min
(2) Oil pump type:XYZ400GZ0
(3) Motor power:15Kwx2
(4) Motor rotating speed:1440r/min
(5) Cooling area:40m2
(6) Cooling water consumption:35t/h
(7) Heater power:4×6=24KW
11、Cooling type: water cooling
12、Lubrication type (thin oil station GYXZ-63×2A)
(1)Low pressure system
Flow rate:63L/min Oil supply pressure:0.4MPa
Oil supply temperature:40±3℃
Motor:Y112M-6 B35 2.2kW
(2)High pressure system
Pump type:2.5MCY14-1B
Flow rate:2.5L/min
Oil supply pressure:32MPa
Motor:Y112M-6 2.2kW
(3) Other performances
Cooling water consumption:5.7m3/h
Heater power:3kW×4
Working media:N22-N320
13、Equipment weight: ***t(except transmission device & grinder)
二、Main spare parts & material quality
1、Shell Q235-B Central section δ=48mm Two ends δ=58mm
2、Supporting: bush body cast steel
Bush liner( Barritt ZchSnSb11-6)
Idler roller:40Cr
Bump ball:40Cr
Ball base:ZG35SiMn
Bottom plate:Q235-B
3、 Liner: Chronuim alloy steel
4、 Thin oil GYXZ-63×2A
5、 Control cabinet & start cabinet
三、 Supply range
1、 Rotary section |
1 set |
2、 Feed device |
1 set |
3、 Slide shoe device |
2 sets/pc |
4、 Discharge device |
1 set |
5、 Liner & double diaphragm device |
1 set |
6、 Main motor YRKK1000-8 3800KW/10KV(6KV) |
1 pc |
7、 Main reducer MFY380A (including oil station) |
1 pc |
8、 Slow driving device MBJ710 |
1 set |
9、 Diaphram coupling MFY380L |
1 set |
10、Thin oil station GYXZ-63×2A |
2 pcs |
11、Control cabinet (including high pressure control, low pressure start, thin oil station control) |
1 pc |
12、Coupling |
1 set per pc |
13、Anchor bolts |
1 set |
|